Yamaha MT2X Owner's Manual - Page 39

GENERAL SPECIFICATIONS TRANSPORT Tape type Heads Tape speeds Pitch control Wow & flutter fast wind Motor CONNECTORS Inputs 1, 2: Input impedance Rated input level Max. input level Min. input level Inputs 3 ~ 6: Input impedance Rated input level Min. input level Aux return L, R: Input impedance Rated input level Min. input level Stereo L, R: Output impedance Load impedance Rated output level Phones out: Load impedance Max. output level Tape out 1-4: O u t p u t i m p e d a n c e Load impedance Rated output level Aux send: Output impedance Load impedance Rated output level ELECTRICAL SPECIFICATIONS Equalizer Frequency responser S/N ratio Distortion Channel separation Erasure ratio Noise reduction OTHERS Power supply Power consumption Dimensions (W x H x D) Weight *dbx is a trademark of dbx Incorporated. All specifications subject to change without notice. Chrome (70 microsec. EQ) 4-channel Permalloy rec/play 4-channel ferrite erase 4.8 cm/sec, 9.5 cm/sec ±10% Less than 0.05% WRMS Approx 100 sec, for C-60 tape DC servo 10 k-ohms - 10 to - 50 dB (fader nominal) + 10 dB (trim min.) - 56 dB (trim, fader max.) 10 k-ohms - 10 dB (fader nominal) - 16 dB (fader max.) 10 k-ohms - 10 dB (fader nominal) - 16 dB (fader max.) 1 k-ohm Greater than 10 k-ohms - 10 dB into 50 k-ohms 8-40 ohms 100 mW + 100 mW 1 k-ohm Greater than 10 k-ohms - 10 dB into 50 k-ohms 1 k-ohm Greater than 10 k-ohms - 10 dB into 50 k-ohms HIGH: ± 10 dB at 10 kHz (shelving) LOW: ± 10 dB at 100 Hz (shelving) 40 Hz~18 kHz, ± 3 dB at 9.5 cm/sec 40 Hz~12.5 kHz, ± 3 dB at 4.8 cm/sec 85 dB, dbx ON, IHF-A Less than 1%, EIAJ 315 Hz Greater than 55 dB at 1 kHz Greater than 70 dB at 1 kHz dbx* U.S. & Canadian Models: 120V, 50 Hz General Model: 110/120/220/240V, 50/60 HZ U.S. & Canadian models: 23W General Model: 21W 413x75x260 mm (16-1/4x3x10-1/4") 3.5 kg (7.7 Ibs.) 37