Yamaha MT2X Owner's Manual - Page 31

Punch-in/Punch-out Procedure, Connections, Setting the recorder, Setting the monitor and meter

Get Yamaha MT2X PDF manuals and user guides View all Yamaha MT2X manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

- Punch-in/Punch-out Procedure - 1. Connections Connect the vocal microphone through input jack 1. If the FS-1 Foot Switch is being used, connect it to the PUNCH IN/OUT jack. 2. Setting the recorder If the FS-1 Foot Switch is connected, set RECORD SELECT switch 1 to the "1" position. The REC indicator will flash. After pressing the PAUSE switch, press the REC switch. (If the FS-1 is being used, the unit is put into the REC PAUSE mode, and the REC indicator lights.) If the FS-1 is connected, set its foot switch so that the REC indicator flashes. 3. Setting the monitor and meter sections Set the PHONES SELECT switch to "MIX". (If it's not set to this position, you won't be able to monitor the new recording sound and the playback sound of tracks 1-4 during punch-in/punch-out operation.) Turn the MONITOR LEVEL control to about . "7". Turn the PHONES volume to about "7". Set the METER SELECT switch to "4 TRK". 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
— Punch-in/Punch-out Procedure —
1. Connections
If the FS-1 Foot Switch is being used, connect it to
Connect the vocal microphone through input jack 1.
the PUNCH IN/OUT jack.
2. Setting the recorder
If the FS-1 Foot Switch is connected, set RECORD
SELECT switch 1 to the "1" position. The REC in-
dicator will flash.
After pressing the PAUSE switch, press the REC
switch. (If the FS-1 is being used, the unit is put
into the REC PAUSE mode, and the REC indicator
lights.)
If the FS-1 is connected, set its foot switch so that
the REC indicator flashes.
3. Setting the monitor and meter sections
Set the PHONES SELECT switch to "MIX". (If it’s
not set to this position, you won’t be able to monitor
the new recording sound and the playback sound
of tracks 1-4 during punch-in/punch-out operation.)
Turn the MONITOR LEVEL control to about . "7".
Turn the PHONES volume to about "7".
Set the METER SELECT switch to "4 TRK".
29