Yamaha PSR-1700 Owner's Manual - Page 21

ZCall the Pitch Bend Range Parameter + - PITCH BEND To set the pitch bend range, roll the PITCH BEND wheel all the way in either direction so that the current range value appears on the LCD display panel. PSR-1700 P.B.Range=+-02 PSR-2700 08:Showtune 001:GrandPno AccOff P.B.Range=+-02 XSet the Pitch Bend Range ... -+ RESET 012 While holding the PITCH BEND wheel at its maximum position, use the [+] and [-] buttons, the number buttons, or the data dial to select the desired pitch bend range. Use the [+/-] button to enter negative values. The pitch bend range value is displayed in semitones (-12 through 12). If a minus setting is selected pitch bend wheel operation is reversed - i.e. roll the wheel away from you to lower pitch. The default pitch bend range (02) can be instantly recalled by pressing [+] and [-] buttons simultaneously. CRelease the PITCH BEND Wheel ...Release the PITCH BEND wheel when you've set the required pitch bend range. s Modulation The MODULATION button on the side panel of the instrument, next to the PITCH BEND wheel, can be used to apply pitch modulation (vibrato) to most voices. The modulation speed is preset for each voice, but the depth can be set as required. ZCall the Modulation Depth Parameter To set the modulation depth, press and hold the MODULATION button so that the current depth value appears on the LCD display panel. PSR-1700 Mod.Depth=2- PSR-2700 08:Showtune 001:GrandPno AccOff Mod.Depth=2- XSet the Modulation Depth ... -+ RESET 012 While holding the MODULATION button, use the [+] and [-] buttons, the number buttons, or the data dial to select the desired modulation depth. The available modulation depth range is from 1 (minimum depth) to 3 (maximum depth). CRelease the MODULATION Button ...Release the MODULATION button when you've set the required modulation depth. NOTES • The same modulation depth setting may produce slightly different effects with different voices. 19