Yamaha PSR-1700 Owner's Manual - Page 61
Press the [SAVE] Button and Confirm
View all Yamaha PSR-1700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
VPress the [SAVE] Button and Confirm SAVE YES NO ARE YOU SURE ? When the desired file type and number have been specified, press the [SAVE] button. The ARE YOU SURE? indicator will flash, and the PSR-1700/ PSR-2700 will ask "Are you sure?". Press [YES] to continue or [NO] to cancel the save operation. "Saving" will appear on the LCD display panel for a few seconds while the data is being saved. "Save Completed" will appear briefly when the data has been saved. PSR-1700 ---ALL Saving--- PSR-2700 08:Showtune 001:GrandPno AccOff ---ALL Saving--- NOTES • An "S" will appear in front of the file number when the save function is selected . MNOPQR S T U VWX Y Z 0 1 2 3 4 5 6 7 8 q Enter an Original File Name Prior to Saving The PSR-1700/PSR-2700 automatically creates a file name (for example "PSR_ _ _01") for the file you are about to save. If you want to enter a more descriptive name for easier file identification (and this is recommended), this can be done via the keyboard immediately before executing step V, above. A file name can consist of up to eight characters. Each key on the keyboard enters a different character, listed immediately below the key. The lowest key (C1) functions as a shift key that shifts between lower- and upper-case characters: hold the SHIFT key while pressing a character key to enter the uppercase character. Each time a character is entered the cursor moves to the next character position (you cannot write over the file extension following the period at then end of the file name). The F5 and F#5 keys move the cursor backward and forward within the file name. Use these keys to place the cursor where you want to enter or change a character. The DELETE key (G5) deletes the character at the cursor position. When you've completed the name, start the save operation by pressing the ENTER key (C6) or by pressing the [YES] button as described in step V. Duplicate file names are not accepted. If you enter a file name that already exists on the disk, the "Same Name" error message will appear on the display. CAUTION • Never remove the disk or turn the power off while the "Saving" display is showing. NOTES • If the file number you have selected already contains data, the PSR-1700/ PSR-2700 will ask for confirmation with then "Overwrite OK?" display. If you're sure you want to write of the existing data press the [YES] button. Press [NO] if you want to cancel. • If the disk becomes full during a save operation "Disk Full" will appear on the display and the save operation will be aborted. In this case the data saved up to that point will be cleared. Sampled voices are an exception, however, since they can be saved individually. If the disk becomes full while saving sampled voices the PSR-2700 will request a new disk in order to save the remaining voices ("Insert Disk No. X" display - "X" being the number of the required disk). • When saving song, custom accompaniment, or multi pad data which uses a sampled voice, be sure to save the sampled voice separately. The sampled voice must then be independently loaded when the song, custom accompaniment, or multi pad data is loaded for use. The sampled voice data will automatically be loaded into the appropriate voice number (do not change the destination voice number when loading). • Save and Load operations can be canceled by pressing and holding the [NO] button. 59