Yamaha SY35 Owner's Manual (feature Reference) - Page 27
LFO Low Frequency Oscillator AM Depth, PM Depth, Type, Delay, Rate & Speed, ET LFO, AM= 0 PM= 0 - manual
View all Yamaha SY35 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
ELEMENT TONE LFO (Low Frequency Oscillator) AM Depth, PM Depth, Type, Delay, Rate & Speed l AM (Amplitude Modulation Depth) ET LFO ABCD AM= 0 PM= 0 Summary: Determines the maximum amount of amplitude modulation that can be applied to the selected element by the modulation wheel or keyboard after touch. Settings: 0 ... 15 Procedure: Use the [4] and [6] cursor keys to select the AM parameter. Use the [-1/NO] and [+1/YES] keys to set the desired degree of amplitude modulation. Details: A " 0 " setting produces no modulation while a setting of " 1 5 " produces maximum modulation. Amplitude modulation produces a periodic variation in the volume of the sound, thus creating a tremolo effect. Please note that the AM parameter of the WHEEL and/or AFTER TOUCH function in the VOICE COMMON edit mode must be set to " o n " before amplitude modulation can be applied manually (see page 7). Amplitude modulation is applied automatically when these parameters are off. l PM (Pitch Modulation Depth) ET LFO ABCD AM= 0 PM= 0 Summary: Determines the maximum amount of pitch modulation that can be applied to the selected element by the modulation wheel or keyboard after touch. Settings: 0 ... 31 Procedure: Use the [4] and [6] cursor keys to select the PM parameter. Use the [-1/NO] and [+1/YES] keys to set the desired degree of pitch modulation. Details: A " 0 " setting produces no modulation while a setting of " 3 1 " produces maximum modulation. Pitch modulation produces a periodic pitch variation, thereby creating a vibrato effect. Please note that the PM parameter of the WHEEL and/or AFTER TOUCH function in the VOICE COMMON edit mode must be set to "on" before pitch modulation can be applied manually. Pitch modulation is applied automatically when these parameters are off. l Type ET LFO ABCD AM= 0 PM= 0 Summary: Determines the waveform of the LFO for the selected element. Settings: SAW UP SAW DOWN TRIANGLE SQUARE SAMPLE&HOLD Procedure: Use the [4] and [6] cursor keys to select the waveform parameter. Use the [-1/NO] and [+1/YES] keys to select the desired LFO waveform. Details: = Upward sawtooth. = Downward sawtooth. = Triangle. = Square. = Sample and hold. 22