Yamaha SY35 Owner's Manual (feature Reference) - Page 33
Envelope Copy, Delay Delay Rate & On/off, Initial Level
View all Yamaha SY35 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
ELEMENT ENVELOPE ENVELOPE COPY EE>COPYfrom ÅBCD any Element? -> Summary: Copies envelope parameters from a selected element to the current element. Settings: Element: A, B, C, D Procedure: Use the [4] and [6] cursor keys to move the cursor to the " f r o m " element parameter. Use the [-1/NO] and [+1/YES] keys to select the element from which the envelope data is to be copied. Press the [6] cursor key one more time and the "Are you sure?" display will appear. Press [+1/YES] to execute the copy operation or [-1/NO] to cancel. ">>Completed!!
ELEMENT ENVELOPE
28
ENVELOPE COPY
EE>COPYfrom ÅBCD
any Element?
->
Summary:
Copies envelope parameters from a
selected element to the current element.
Settings:
Element: A, B, C, D
Procedure:
Use the [
4
] and [
6
] cursor keys to move
the cursor to the “from” element parameter.
Use the [–1/NO] and [+1/YES] keys to select the
element from which the envelope data is to be
copied.
Press the [
6
] cursor key one more time and the
“Are you sure?” display will appear. Press
[+1/YES] to execute the copy operation or
[–1/NO] to cancel. “>>Completed!!<<” will
appear briefly when the copy operation has
finished.
Details:
This
function
can
save
a
lot
of
programming time by allowing easy copying of
complex USER type envelope data between
elements.
DELAY (Delay Rate & ON/OFF)
EE>DELAY
ÅBCD
Rate= 0
off
Summary:
Sets a delay before the envelopes of all
elements begin.
Settings:
Delay: 0 … 99
Mode: on/off
Procedure:
Use the [
4
] and [
6
] cursor keys to move
the cursor to the
“Rate”
parameter.
Use
the [–1/NO] and [+1/YES] keys to select the
desired delay rate.
Press the [
6
] cursor key one more time to move
to the on/off mode parameter, and use the
[–1/NO] and [+1/YES] keys to set as required.
Details:
The envelope delay rate parameter affects
all envelopes simultaneously. A setting of “0”
produces almost no delay while a setting of
“99” produces maximum delay.
INITIAL LEVEL
EE>INITIAL
ÅBCD
Level=
0
Summary:
Sets the starting level of the amplitude
envelope for the current element.
Settings:
0 … 99
Procedure:
Use the [
6
] cursor key to move the cur-
sor to the lower display line. Use the [–1/NO]
and [+1/YES] keys to set the initial level.
Details:
A setting of “0” means that the envelope
will begin from zero (minimum) level, while a
setting of “99”causes the envelope to begin
immediately from maximum level. The highest
setting produces the sharpest attack.
Decay
1 level
•
Key ON (Delay off)
Key OFF
LEVEL
TIME
•
•
•
Initial
level
Attack
level
Decay 2
level
Decay
1 rate
Decay
2 rate
Attack rate
Release
rate