Yamaha SY35 Owner's Manual (feature Reference) - Page 59
Local Control On/off, Midi Program Change, Midi Control Change
View all Yamaha SY35 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
UTILITY MIDI LOCAL CONTROL ON/OFF MD>LOCAL Local=on Summary: Determines whether the SY35 keyboard controls the internal tone generator system or not. Settings: on, off. Procedure: Use the [6] cursor key to move the cursor to the lower display line. Use the [-1/NO] and [+1/YES] keys to turn local control on or off. Details: Normally, local control will be turned "on" so that the SY35 keyboard plays its own internal tone generator system. If you want to control an external MIDI tone generator or other device from the SY35 keyboard without playing the internal tone generator, turn local control "off." One possibility is to drive the SY35 tone generator system from an external sequencer while independently playing a separate external tone generator from the SY35 keyboard. MIDI PROGRAM CHANGE MD>PROG.CHANGE =off Summary: Determines how the SY35 will respond to MIDI program change messages for remote voice/multi selection. Settings: off, common, individual Procedure: Use the [6] cursor key to move the cursor to the lower display line. The [-1/NO] and [+1/YES] keys are used to select the desired MIDI program change mode. Details: The " o f f " setting turns MIDI program change reception and transmission off, so MIDI program change messages received from external equipment will not cause the corresponding SY35 voice to be selected, and no program change messages will be transmitted by the SY35 when one of its voices are selected. In the "common" mode, program change numbers 0 through 63 received from external equipment will select SY35 voices 1.1 through 8.8, and program change numbers 64 through 79 select multi-play setups 1.1 through 2.8. The card, internal or preset voice banks cannot be selected via MIDI control. The corresponding program change number will also be transmitted by the SY35 when one of its voices are selected. The "individual" mode allows individual voice selection for each multi-play part when the MULTI play mode is active. Program change between 0 and 63 received in a specific MIDI channel will change only the voice for the multiplay part assigned to that channel. MIDI CONTROL CHANGE MD>CTRL.CHANGE =off Summary: Determines whether or not the SY35 will receive and transmit MIDI control change messages. Settings: off, on 54