Yamaha SY35 Owner's Manual (feature Reference) - Page 28

ET LFO, ˚Dly= 0 Rate= 0-&gt, ÅBCD, ˚Spd= 0

Get Yamaha SY35 PDF manuals and user guides View all Yamaha SY35 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

l Dly (Delay) ET LFO ABCD ˚Dly= 0 Rate= 0-> Summary: Sets the delay time between the beginning of a note and the beginning of LFO operation for the selected element when the WHEEL and AFTER TOUCH parameters in the VOICE COMMON edit mode are both turned off. Settings: 0 ... 99 Procedure: Use the [4] and [6] cursor keys to select the Dly parameter. Use the [-1/NO] and [+1/YES] keys to set the desired LFO delay. Details: The minimum setting " 0 " results in no delay, while the maximum setting of "99" produces maximum delay before the LFO begins operation. l Rate ET LFO ÅBCD ˚Dly= 0 Rate= 0-> Summary: Sets the rate of LFO "fade in" for the selected element when the WHEEL and AFTER TOUCH parameters in the VOICE COMMON edit mode are both turned off. Settings: 0 ... 99 ELEMENT TONE Procedure: Use the [4] and [6] cursor keys to select the Rate parameter. Use the [-1/NO] and [+1/YES] keys to set the desired LFO fade-in rate. Details: "0" is the fastest rate, causing the LFO to start operation at full depth immediately. A setting of 99 produces the longest LFO fade in. l Spd (Speed) ET LFO ˚Spd= 0 ABCD Summary: Sets the speed of the LFO for the selected element. Settings: 0 ... 31 Procedure: Use the [4] and [6] cursor keys to select the Spd parameter. Use the [-1/NO] and [+1/YES] keys to set the desired LFO speed. Details: "0" is slowest LFO speed setting; "31" is the fastest. The speed parameter can not be edited when the sample-and-hold (º-º) LFO TYPE is selected. 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
ELEMENT TONE
23
●
Dly (Delay)
ET LFO
ABCD
˚Dly= 0 Rate= 0->
Summary:
Sets the delay time between the begin-
ning of a note and the beginning of LFO opera-
tion for the selected element when the WHEEL
and AFTER TOUCH parameters in the VOICE
COMMON edit mode are both turned off.
Settings:
0 ... 99
Procedure:
Use the [
4
] and [
6
] cursor keys to select
the Dly
parameter.
Use
the
[–1/NO]
and
[+1/YES] keys to set the desired LFO delay.
Details:
The minimum setting “ 0 ” results in no
delay, while the maximum setting of “99” pro-
duces maximum delay before the LFO begins
operation.
●
Rate
ET LFO
ÅBCD
˚Dly= 0 Rate= 0->
Summary:
Sets the rate of LFO “fade in” for the
selected element when the WHEEL and AFTER
TOUCH parameters in the VOICE COMMON
edit mode are both turned off.
Settings:
0 ... 99
Procedure:
Use the [
4
] and [
6
] cursor keys to select
the Rate parameter. Use the
[–1/NO]
and
[+1/YES] keys to set the desired LFO fade-in
rate.
Details:
“0” is the fastest rate, causing the LFO to
start operation at full depth immediately. A set-
ting of 99 produces the longest LFO fade in.
●
Spd (Speed)
ET LFO
ABCD
˚Spd= 0
Summary:
Sets the speed of the LFO for the
selected element.
Settings:
0 ... 31
Procedure:
Use the [
4
] and [
6
] cursor keys to select
the Spd parameter.
Use
the
[–1/NO]
and
[+1/YES] keys to set the desired LFO speed.
Details:
“0” is slowest LFO speed setting; “31” is
the fastest.
The speed parameter can not be edited when the
sample-and-hold (
º–º
) LFO TYPE is selected.