2013 Acura TL Owner's Manual - Page 242
2013 Acura TL Manual
Page 242 highlights
Playing the AM/FM Radio (Models without navigation system) To Play the Radio The ignition switch must be in the ACCESSORY (I) or ON (II) position. Turn the system on by pushing the VOL/ (power/volume) knob or the AM/FM button. Adjust the volume by turning the VOL/ knob. The band and frequency that the radio was last tuned to are displayed. To change bands, press the AM/FM button. On the FM band, ST will be displayed if the station is broadcasting in stereo. Stereo reproduction in AM is not available. On the AM band, AM noise reduction turns on automatically. To Select a Station You can use any of five methods to find radio stations on the selected band: tune, skip, scan, the preset buttons, and auto select. On the FM band, you can also use the features provided by the radio data system (RDS). For more information on the RDS, see page 240 . TUNE Use the selector knob to tune the radio to a desired frequency. Turn the knob right to tune to a higher frequency, or left to tune to a lower frequency. SKIP The skip function searches up and down from the current frequency to find a station with a strong signal. To activate it, press and hold the or side of the SKIP bar until you hear a beep, then release it. SCAN The scan function samples all stations with strong signals on the selected band. To activate it, press the SCAN button, then release it. You will see SCAN in the display. When the system finds a strong signal, it will stop and play that station for about 10 seconds. If you do nothing, the system will scan for the next strong station and play it for 10 seconds. When it plays a station that you want to listen to, press the SCAN button again. Features 238 2013 TL