2013 Acura TL Owner's Manual - Page 596
2013 Acura TL Manual
Page 596 highlights
Jump Starting 7. Start the vehicle. If the starter motor still operates slowly, check that the jumper cables have good metal-to-metal contact. 8. Once the vehicle is running, disconnect the negative cable from your vehicle, then from the booster battery. Disconnect the positive cable from your vehicle, and then from the booster battery. 9. Install the battery terminal cover. The numbers in the illustration show you the order to connect the jumper cables. 4. Connect one jumper cable to the positive ( ) terminal on your battery. Connect the other end to the positive ( ) terminal on the booster battery. 5. Connect the second jumper cable to the negative ( ) terminal on the booster battery. Connect the other end to the engine hanger as shown. Do not connect this jumper cable to any other part of the engine. 6. If the booster battery is in another vehicle, have an assistant start that vehicle and run it at a fast idle. Keep the ends of the jumper cables away from each other and any metal on the vehicle until everything is disconnected. Otherwise, you may cause an electrical short. Taking Care of the Unexpected BOOSTER BATTERY 592 2013 TL