2013 Acura TL Owner's Manual - Page 564
2013 Acura TL Manual
Page 564 highlights
Lights 6. Install the new bulb in the socket by pushing it straight in the socket until it bottoms. 7. Insert the socket into the light assembly. Turn it clockwise to lock it in place. 8. Turn on the lights to make sure the new bulb is working. 9. Push the under cover in place and set the inner fender cover in the original position. Install the bolts and tighten them securely. Insert each holding clip, and lock it by pushing on its center. Halogen bulbs get very hot when lit. Oil, perspiration, or a scratch on the glass can cause the bulb to overheat and shatter. The fog lights were properly aimed when your vehicle was new. If you regularly carry heavy items in the trunk, readjustment may be required. Adjustment should be done by your dealer or another qualified technician. Replacing a Front Fog Light Bulb Your vehicle uses halogen light bulbs. When replacing a bulb, handle it by its plastic case, and protect the glass from contact with your skin or hard objects. If you touch the glass, clean it with denatured alcohol and a clean cloth. 1. Start the engine. If you are replacing a driver's side bulb, turn the steering wheel all the way to the right. If you are replacing a passenger's side bulb, turn the steering wheel to the left. Turn off the engine. Maintenance 560 2013 TL