2013 Acura TL Owner's Manual - Page 476
2013 Acura TL Manual
Page 476 highlights
Service Station Procedures Turn the engine off, and confirm the fuel fill cap is installed. If it is, loosen it, then retighten it until it clicks at least once. The message should go off after several days of normal driving once you tighten or replace the fuel fill cap. To scroll to another message, press the INFO button. The ''TIGHTEN FUEL CAP'' message will appear each time you restart the engine until the system turns the message off. Before Driving If the system still detects a leak in your vehicle's evaporative emissions system, the malfunction indicator lamp (MIL) comes on. If the fuel fill cap was not already tightened, turn the engine off, and check or retighten the fuel fill cap until it clicks at least once. The MIL should go off after several days of normal driving once the cap is tightened or replaced. If the MIL does not go off, have your vehicle inspected by a dealer. For more information, see page 597 . Opening and Closing the Hood HOOD RELEASE HANDLE 1. Park the vehicle, and set the parking brake. Pull the hood release handle located under the lower left corner of the dashboard. The hood will pop up slightly. 472 2013 TL