2013 Acura TL Owner's Manual - Page 98

Multi-Information Display Customized Settings You can customize some vehicle control settings. To change the settings, the ignition switch must be in the ON (II) position, and the vehicle must be stopped with the transmission in Park (automatic) or with the parking brake set (manual). If you turn the ignition switch to the ACCESSORY (I) or the LOCK (0) position, move the shift lever out of Park (automatic) or release the parking brake (manual), the display will change to the normal screen. : Models equipped with the keyless access system have an engine start/stop button instead of an ignition switch. VEHICLE OFF (LOCK) Mode is the equivalent of LOCK (0) and ACCESSORY Mode is the equivalent of ACCESSORY (I). For more information, see pages 184 and 187 . If you try to enter the customizing mode while the vehicle is moving, you will see a ''MUST STOP AND SHIFT TO PARK TO CHANGE SETTINGS'' (automatic) or ''MUST STOP AND SET PARK BRAKE TO CHANGE SETTINGS'' (manual) message and you cannot change the settings. You can customize some vehicle control settings for ''DRIVER 1'' and ''DRIVER 2'' separately. To have the driver's ID detected, make sure the driver's door is unlocked with a corresponding remote transmitter/keyless access remote. Instruments and Controls 94 2013 TL