2013 Acura TL Owner's Manual - Page 588

Changing a Flat Tire JACK WHEEL NUT WRENCH EXTENSION WHEEL NUT WRENCH JACKING POINTS 4. Take the tool case out of the spare tire. Taking Care of the Unexpected 8. Loosen each wheel nut 1/2 turn with the wheel nut wrench. 5. Unscrew the wing bolt and take the spare tire out of its well. 6. Take the jack out of the tool kit case. 7. Place blocks in front and back of the wheel diagonally opposite the tire you are changing. 9. Place the jack under the jacking point nearest the tire you need to change. Turn the end bracket clockwise until the top of the jack contacts the jacking point. Make sure the jacking point tab is resting in the jack notch. 584 2013 TL