2006 BMW 6 Series Owner's Manual - Page 193
2006 BMW 6 Series Manual
Page 193 highlights
Under the hood 4. Select "Service requirements" and press the controller. Topping off engine oil 5. Select "Engine oil level" and press the controller. The oil level is displayed. Do not add 1 quart/1 liter of oil until a corresponding message appears on the Control Display. Add oil within the next 125 miles/200 km, otherwise engine damage could result.< Continuous contact with used oil has caused cancer in laboratory tests. For this reason, thoroughly wash exposed areas of skin with soap and water after such work. Keep oil, grease, etc. out of reach of children and heed warnings on containers. Failure to do so could pose health risks.< Possible messages > "Engine oil level O.K." > "No measured value available: Updating engine oil level measurement...": Engine oil level is being measured. This process can take approx. 3 minutes when stopped on a level surface and approx. 5 minutes while driving. > "Oil level at the minimum! Refill with 1 quart engine oil.": Add 1 quart/liter of engine oil at the next opportunity. > "Engine oil level too high": Have the vehicle checked immediately; otherwise, engine damage may result if too much oil has been added.< > "Please observe recalculated service interval for engine oil": Do not add engine oil. Continued driving is possible. To do this, observe the recalculated remaining mileage until the next oil change service, refer to page 195. Have the system checked as soon as possible. Oil change Have oil changes carried out only by a BMW center or a repair shop that works in accordance with BMW guidelines and uses appropriately trained personnel. Approved engine oils The quality of the engine oil selected has critical significance for the operation and service life of an engine. BMW continuously approves specific oils after confirming their suitability for use in its vehicles with extensive testing. Use only approved BMW High Performance Synthetic Oil. If BMW High Performance Synthetic Oil is unavailable, you can add small quantities of other synthetic oils between oil changes. Use only oils of the specification API SH or higher. Your BMW center will be happy to answer detailed questions on BMW High Performance Synthetic Oil or approved synthetic oils.< 192 Online Edition for Part-No. 01 41 0 159 709 © 09/05 BMW AG
![](/manual_guide/autos/2006-bmw-6-series-owners-manual-03b1e22/193.png)