2006 BMW 6 Series Owner's Manual - Page 98
2006 BMW 6 Series Manual
Page 98 highlights
cannot detect fog. To avoid safety risks, you should always switch on the lamps manually under these conditions.< Roadside parking lamps, left or right* You also enjoy the option of lighting up just one side of your vehicle when parking. When using this function, comply with national regulations: After parking the vehicle, press the lever in the desired direction 3, past the resistance point. Adaptive Head Light* The concept Adaptive Head Light is a variable headlamp control system that enables better illumination of the road surface. Depending on the steering angle and other parameters, the light from the headlamp follows the course of the road. Activating Adaptive Head Light In switch position 1, the Adaptive Head Light is active and the automatic headlamp control is switched on. To avoid blinding oncoming traffic, the Adaptive Head Light is not active when driving in reverse and points toward the passenger side when the vehicle is stopped. The concept This system automatically switches the high beams on and off again. A sensor on the front of the interior rearview mirror controls the process. The assistant ensures that the high beams are switched on whenever the traffic situation allows. This reduces the strain on you while at the same time providing you with the best possible visibility. Of course, you can intervene at any time and switch the high beams on and off in the accustomed manner. Malfunction The LED next to the symbol for automatic headlamp control flashes. The Adaptive Head Light is malfunctioning or has failed. Have the system checked as soon as possible. Activating high-beam assistant 1. Turn the light switch to switch position 1, refer to page 96. 2. Press the turn signal lever in the high beam direction with the low beams switched on. High beams/ roadside parking lamps 1 2 3 High beams Headlamp flasher Roadside parking lamps 97 Online Edition for Part-No. 01 41 0 159 709 © 09/05 BMW AG Reference The indicator lamp in the instrument cluster lights up when the high-beam assistant is activated. The assistant automatically switches between high and low beams, reacting to oncoming traffic and traffic Mobility Communications Entertainment Navigation Driving tips High-beam assistant* Controls The roadside parking lamps drain the battery. Avoid using for longer periods; otherwise, it may not be possible to start the engine.< At a glance