2006 BMW 6 Series Owner's Manual - Page 82
2006 BMW 6 Series Manual
Page 82 highlights
Displays after completion of trip Malfunction reports generated during the trip are shown consecutively when you switch off the ignition. Before the display disappears, you can display the messages once again. Press the CHECK button for approx. 2 seconds. If several messages are present, you can press the CHECK button repeatedly. The display: > turns off automatically after a brief period > can be turned off at any time by pressing the CHECK button again for approx. 2 seconds 5. Select the speed value and press the controller. 6. Turn the controller to set the limit. If necessary, hold it against a slight resistance to enter a greater difference. 7. Press the controller to apply the setting. The limit is automatically switched on. Applying your current speed as limit Select "Select current speed" and press the controller. The system applies your current speed as the limit. Activating limit Select "On" and press the controller. The limit is automatically switched on. Speed limit You can enter a speed and a Check Control message indicates when you have reached this speed. This enables you, for example, to receive warnings if you exceed a speed limit in an urban area. You are only warned of reaching this speed a second time if your vehicle has fallen at least 3 mph/5 km/h below it in the meantime. Stopwatch iDrive, for principle details, refer to page 16. 1. Open start menu. 2. Open "Navigation". In vehicles without navigation system*: Open "Car Data". 3. Select "Car Data" and press the controller. 4. Select "Stopwatch" and press the controller. Navigation Reference Mobility Communications Entertainment Displaying, setting or changing limit iDrive, for principle details, refer to page 16. 1. Open start menu. 2. Open "Navigation". In vehicles without navigation system*: Open "Car Data". 3. Select "Car Data" and press the controller. 4. Select "Limit" and press the controller. Starting, stopping, or resetting > Select "Start" and press the controller. The stopwatch starts at the displayed time. > Select "Reset" and press the controller. The stopwatch is reset and it restarts if it was running beforehand. > Select "Stop" and press the controller. This stops the timer. 81 Online Edition for Part-No. 01 41 0 159 709 © 09/05 BMW AG Driving tips Controls At a glance
![](/manual_guide/autos/2006-bmw-6-series-owners-manual-03b1e22/82.png)