2008 BMW 5 Series Owner's Manual - Page 241
2008 BMW 5 Series Manual
Page 241 highlights
Low beams H7 bulb, 55 watts 1. Turn the bulb holder to the left and remove. Have work on the xenon lighting system performed only by your BMW center or a workshop that works according to BMW repair procedures with correspondingly trained personnel. Due to the high voltage present in the system, there is a danger of fatal injuries when work is carried out improperly.< Access to lamps The illustration shows the left-hand side of the engine compartment. 2. Remove and replace the bulb. High beams H7 bulb, 55 watts 1. Turn the bulb holder to the left and remove. 1 2 Cover cap for parking and roadside parking lamps, daytime running lamps Sealing cap for turning lamps* > Parking lamps and roadside parking lamps, daytime running lamps: turn the cover cap to the left and remove. 2. Remove and replace the bulb. > Turning lamps: turn the sealing cap to the left and remove. Parking and roadside parking lamps In the event of a malfunction, please go to your BMW center or a workshop that works according to BMW repair procedures with correspondingly trained personnel. Parking lamps and roadside parking lamps, daytime running lamps H8 bulb, 35 watts 1. Turn the bulb in the direction of the arrow, in the opposite direction on the other side, and remove. Xenon lamps* The service life of these bulbs is very long and the probability of a failure is very low, provided that they are not switched on and off an unusual number of times. If one of these bulbs should nevertheless fail, it is possible to continue driving with great caution using the fog lamps, provided traffic laws in your area do not prohibit this. 239 Online Edition for Part no. 01 41 0 014 240 - © 08/07 BMW AG Reference Mobility Communications Entertainment To remove the covers: Navigation Driving tips Controls At a glance