2008 BMW 5 Series Owner's Manual - Page 59

Locking safety belt 1. Secure the child restraint system with the belt. 2. Pull out the belt webbing completely. 3. Allow the belt webbing to be pulled in and pull taut against the child restraint system. The safety belt is locked. Sedan: rear seats with through-loading system* Unlocking safety belt 1. Open the belt buckle. 2. Remove the child restraint system. 3. Allow the belt webbing to be pulled in completely. The anchor points for the LATCH anchors are located behind the indicated protective caps. Remove the cover caps before mounting the child's seat. LATCH child restraint fixing system LATCH: Lower Anchor and Tethers for CHildren. Follow the system manufacturer's instructions on installation and use of LATCH child restraint systems in order not to impair their protective function.< Before attaching the LATCH child's seat, pull the belt away from the region of the child restraint fixing system. Make sure that the LATCH mounts have properly clicked into place and that the child restraint system is resting snugly against the backrest. Otherwise, the protective action may be impeded.< Sports Wagon: rear seats The anchor points for the LATCH anchors are located behind the indicated protective caps and are covered again after the child's seat is removed. Sedan: rear seats Child restraint system with tether strap Only use the tether-strap mounting points to secure child restraint systems, otherwise the mounting points could be damaged.< The anchor points for the LATCH anchors are located at the positions indicated by arrows in the gap between the seat and the backrest. 57 Online Edition for Part no. 01 41 0 014 240 - © 08/07 BMW AG Reference Mobility Communications Entertainment Navigation Driving tips Controls At a glance