1997 Chevrolet Corvette Owner's Manual - Page 255

Then, followthese steps: How to Add Fluid Here's how to add fluid. Refer to the Maintenance Schedule to determinewhat kind of fluid to use. See "Recommended Fluids and Lubricants" in the Index. 1. Remove the filler plug. 2. Add fluid at the filler plug hole. Add only enough fluid tobring the fluid level up to the bottom of the filler plug hole. 3. Install the filler plug.Be sure the plug is fully seated. 4. Tighten the plug to 20 Ib-ft. (27 N-m). Hydraulic Clutch 1. Remove the filler plug. The clutch linkage in your vehicle is self-adjusting. The clutch master cylinder reservoir is filled with hydraulic clutch fluid. It isnot necessary to regularly check clutch fluid unless you suspect there is a leak in the system. Adding fluid won't correct a leak. A fluid loss in this system could indicate a problem. Have the system inspected and repaired. 2. Check that the lubricant level is up to the bottom of the fillerplug hole. 3. If the fluid level is good, install the plug and be sure it is fully seated. If the fluid level is low, add more fluid as described in the next steps. 6-20