1997 Chevrolet Corvette Owner's Manual - Page 262

How To Check Power Steering Fluid When the engine compartment is cool,wipe the capand the top of the reservoir clean, then unscrew the cap and wipe the dipstick with a clean rag.Replace the cap and completely tighten it. Then remove the capagain and look at the fluid level on the dipstick. What to Use To determine what kind of fluid to use, see "Recommended Fluids and Lubricants" in the Index. Always use the proper fluid. Failure to use the proper fluid can cause leaksand damage hoses and seals. FULL COLD mark. If necessary, The level should be at the add only enough fluid to bring the level up to the mark. Windshield Washer Fluid What to Use When you need windshield washer fluid, be sure to read the manufacturer's instructions before use.If you will be operating your vehicle inan area where the temperature may fall below freezing, use a fluid that has sufficient protection against freezing. , When the engine compartment is hot, the level should be at the HOT mark. When the engine compartment is cool, the level should be at the FULL COLD mark.