1997 Chevrolet Corvette Owner's Manual - Page 265

Checking Brake Fluid You can check the brake fluid without taking off the cap. Just look at the brake fluid reservoir. The fluid level should be above the MIN mark on the reservoir. If it isn't, have your brake system checked to see if there is a leak. After work is done on the brake hydraulic system, make sure the level is between the MIN and MAX marks. NOTICE: 0 What to Add When you do need brake fluid, use only DOT-3 brake fluid -- such as Delco Supreme l l @ (GM Part No. 12377967). Use new brake fluid from a sealed container only. Always clean the brake fluid reservoir cap and the area around the cap before removing it. This will help keep dirt fromentering the reservoir. 0 Using the wrong fluid can badly damage brake system parts. For example, just a few drops of mineral-based oil, such as engine oil, in your brake system can damage brake system parts so badly that they'll have to be replaced. Don't let someoneput in the wrong kind of fluid. If you spill brake fluid on your vehicle's painted surfaces, thepaint finish canbe damaged. Be careful not to spillbrake fluid on your vehicle. If you do, washit off immediately. See"Appearance Care" in the Index. With the wrong kind of fluid in your b,,ke system, your brakes may not work well, or they may not even workat all. This could cause a crash. Always use the proper brakefluid. 6-30