2003 Chevrolet Express Van Owner's Manual - Page 302

Windshield Wiper Blade Replacement Windshield wiper blades should be inspected at least twice a year for wear and cracking. See "Wiper Blade Check in At Least Twice a Year on page 6-13 for more information. Replacement blades come in different types and are removed in different ways. To remove the type with a release clip, do the following: 1 Lift the wiper arm until it locks into a vertical position. = 2. Press down on the blade assembly pivot locking tab. Pull down on the blade assembly to release it from the wiper arm hook. 3. The insert has two notches at one end that are locked by bottom claws of the blade assembly. At the notched end, pull the insert from the blade assembly. 4. To install the new wiper insert, slide the notched end last, into the end with two blade claws. Then slide the insert all the way through the blade claws at the opposite end. 5. Make sure that the notches are locked by the bottom claws. Make sure that all other claws are properly locked on both sides of the insert slot. 6. Put the blade assembly pivot in the wiper arm hook. Pull it up until the pivot locking tab locks in the hook slot. l . Carefully lower the wiper arm and blade assembly into the windshield. 5-59