2012 Chevrolet Traverse Owner's Manual - Page 285

Driving and Operating Rear Vision Camera Location 9-37 When the System Does Not Seem To Work Properly The rear vision camera system might not work properly or display a clear image if: . The camera is located in the rear liftgate handle. The area displayed by the camera is limited and does not display objects that are close to either corner or under the bumper. The area displayed can vary depending on vehicle orientation or road conditions. The distance of the image that appears on the screen differs from the actual distance. The following illustration shows the field of view that the camera provides. A. View displayed by the camera. B. Corner of the rear bumper. The RVC is turned off. See "Turning the Rear Camera System On or Off" earlier in this section. It is dark. The sun or the beam of headlights is shining directly into the camera lens. Ice, snow, mud, or anything else builds up on the camera lens. Clean the lens, rinse it with water, and wipe it with a soft cloth. The back of the vehicle is in an accident. The position and mounting angle of the camera can change or the camera can be affected. Be sure to have the camera and its position and mounting angle checked at your dealer. . . . .