2012 Chevrolet Traverse Owner's Manual - Page 67

Seats and Restraints Push and pull on the head restraint to make sure that it is locked. 5. Push down on the rear of the seat cushion until it is locked in place. 6. Push and pull on the seatback and seat cushion to make sure they are locked in place. 7. Check that the safety belt is not under the seat cushion. 3-11 Folding the Seatback To fold the second row seatbacks: 1. Remove anything on or under the seat. 2. Place the armrest in the upright position, and unfasten the safety belt. 3. Pull forward on the reclining seatback strap (B) and push down on the seatback. The head restraint will fold down automatically. To return the seatback to the seating position, lift the upper corner of the seatback and push it rearward until it locks into place. Push and pull on the seatback to make sure it is locked. Pull up on the head restraint to return it to the upright, locked position. Adjusting the Seats To adjust the second row seats, pull outward on the seat adjustment handle (A). Slide the seat forward or rearward to the desired position. Release the handle, and push and pull on the seat to make sure it is locked. Third Row Seats Reclining the Seatbacks To recline the seatback: 1. Leaning forward in the seat, pull the reclining seatback strap (B). 2. Move the seatback to the desired position, and then release the strap to lock the seatback in place. 3. Push and pull on the seatback to make sure it is locked. { WARNING Using the third row seating position while the second row is folded, or pushed forward in the entry position, could cause injury in a sudden stop or crash. Be sure to return the seat to the passenger seating position. Push and pull on the seat to make sure it is locked into place.