2012 Chevrolet Traverse Owner's Manual - Page 328

10-28 Vehicle Care 3. Turn the bulb socket (C) one‐quarter turn to release the bulb socket from the lamp housing (A). 4. Pull the bulb (B) from the bulb socket (C). 5. Reverse the steps to install. License Plate Lamp Electrical System High Voltage Devices and Wiring { WARNING Exposure to high voltage can cause shock, burns, and even death. The high voltage components in the vehicle can only be serviced by technicians with special training. High voltage components are identified by labels. Do not remove, open, take apart, or modify these components. High voltage cable or wiring has orange covering. Do not probe, tamper with, cut, or modify high voltage cable or wiring. Replacement Bulbs A. License Plate Lamp Housing B. Bulb C. Bulb Socket To replace one of these bulbs: 1. Using a small flat-bladed tool, insert the blade end at the back edge of the rear license plate lamp housing (A). 2. Gently push forward while lifting the back edge of the lamp housing from the bumper opening. Exterior Lamp License Plate Lamp Rear Sidemarker Lamp Rear Turn Signal and Taillamps Bulb Number 194LL 194LL 7443 (W21/5W) For replacement bulbs not listed here, contact your dealer.