2014 Chevrolet Cruze Owner Manual - Page 125

Instruments and Controls 5-19 Traction Control System (TCS)/StabiliTrak® Light If the indicator/warning light is on and flashing, the TCS and/or the StabiliTrak system is actively working. See Traction Control/Electronic Stability Control on page 9-41. Tire Pressure Light Wait-to-Start Light This light comes on briefly when the engine is started. If the light does not come on, have the vehicle serviced by your dealer. If the system is working normally, the indicator light turns off. If the light is on and not flashing, the TCS, and potentially the StabiliTrak system have been disabled. A DIC message may display. Check the DIC messages to determine which feature(s) is no longer functioning and whether the vehicle requires service. For vehicles with the Tire Pressure Monitor System (TPMS), this light comes on briefly when the engine is started. It provides information about tire pressures and the TPMS. When the Light Is On Steady For diesel engines, the wait-to-start light shows that the engine is functioning properly and indicates when the engine can be started. The fast warm-up glow plug system makes the wait-to-start light stay on for a shorter amount of time than most diesel engines. For more information, see Starting the Engine on page 9-18. This indicates that one or more of the tires are significantly underinflated. A Driver Information Center (DIC) tire pressure message may also display. See Tire Messages on page 5-33. Stop as soon as possible, and inflate the tires to the pressure value shown on the Tire and Loading Information label. See Tire Pressure on page 10-51.