2014 Chevrolet Cruze Owner Manual - Page 336

10-74 Vehicle Care Removing the Flat Tire and Installing the Spare Tire This vehicle may have aluminum wheels with exposed wheel nuts. Use the wheel wrench to loosen all the wheel nuts. Do not remove them yet. Or, this vehicle may have steel wheels with plastic covers. 2. Tool Bag Tether 3. Tool Bag 4. Spare Tire 1. Open the trunk. See Trunk on page 2-14. 2. Lift the load floor. 3. Turn the retainer nut (1) counterclockwise to remove it. Then remove the tool bag tether (2) from the stow rod, the tool bag (3) containing the wheel wrench and wheel blocks, and the spare tire (4). 4. Remove the jack, jack handle extension, and two-piece wrench, if equipped. 1. Three-Piece Wrench 2. Hex Head Jack 3. Jack Handle Extension 4. Coin/Pierce Jack 5. Two-Piece Wrench This vehicle may have one of the following: A coin/pierce jack (4), a jack handle extension (3), and a two-piece wrench (5), or a hex head jack (2) and three-piece wrench (1). To remove the plastic covers and wheel nut caps, loosen the plastic nut caps with the wheel wrench in a counterclockwise direction.