2014 Chevrolet Cruze Owner Manual - Page 292
2014 Chevrolet Cruze Manual
Page 292 highlights
10-30 Vehicle Care shift lever is in P (Park). The ignition key should come out only in LOCK/OFF. . 1. Before starting this check, be sure there is enough room around the vehicle. It should be parked on a level surface. 2. Apply the parking brake. Be ready to apply the regular brake immediately if the vehicle begins to move. 3. With the engine off, turn the ignition on, but do not start the engine. Without applying the regular brake, try to move the shift lever out of P (Park) with normal effort. If the shift lever moves out of P (Park), contact your dealer for service. For manual transmission vehicles, the ignition key should come out only in LOCK/OFF. Park on a fairly steep hill, with the vehicle facing downhill. Keeping your foot on the regular brake, set the parking brake. . Contact your dealer if service is required. Park Brake and P (Park) Mechanism Check To check the parking brake's holding ability: With the engine running and the transmission in N (Neutral), slowly remove foot pressure from the regular brake pedal. Do this until the vehicle is held by the parking brake only. To check the P (Park) mechanism's holding ability: With the engine running, shift to P (Park). Then release the parking brake followed by the regular brake. . { Warning When you are doing this check, the vehicle could begin to move. You or others could be injured and property could be damaged. Make sure there is room in front of the vehicle in case it begins to roll. Be ready to apply the regular brake at once should the vehicle begin to move. Ignition Transmission Lock Check While parked, and with the parking brake set, try to turn the ignition to LOCK/OFF in each shift lever position. . Contact your dealer if service is required. Wiper Blade Replacement Windshield wiper blades should be inspected for wear or cracking. See Maintenance Schedule on page 11-2 for more information. For automatic transmission vehicles, the ignition should turn to LOCK/OFF only when the