2014 Chevrolet Cruze Owner Manual - Page 96

3-42 Seats and Restraints If you are using a single tether in the center seating position, or the rear outboard head restraint has been removed, route the single tether over the seatback. 3. Before placing a child in the child restraint, make sure it is securely held in place. To check, grasp the child restraint at the LATCH path and attempt to move it side to side and back and forth. There should be no more than 2.5 cm (1 in) of movement, for proper installation. If you are using a dual tether in a rear outboard seating position with an adjustable head restraint, raise the head restraint and route the tether under the head restraint and around the head restraint posts. If you are using a dual tether in the center seating position, or the rear outboard head restraint has been removed, route the dual tether over the seatback. Head Restraint Removal and Reinstallation The rear outboard head restraints can be removed if they interfere with the proper installation of the child restraint. To remove the head restraint: 1. Partially fold the seatback forward. See Rear Seats on page 3-6 for additional information.