2014 Chevrolet Silverado 1500 Regular Cab Owner Manual - Page 131

Storage 4-5 Additional Storage Features Cargo Tie-Downs To remove: 1. Remove the tie-down loop completely by turning counterclockwise while holding the backing plate against the truck bed wall. 2. Pull the backing plate away from the truck bed wall until a click is heard. This locks the toggle into position on the toggle guide. To install: 1. Insert a tie-down loop until it is flush with the truck bed wall. 2. Turn the tie-down loop clockwise to tighten. The tie-down will be hard to turn until the toggle moves past the installation point on the toggle guide. 3. Fasten the tie-down firmly by hand only. Do not use tools. 3. Push the backing plate against the truck bed wall. This allows the toggle nut to spin. 4. Remove the backing plate, toggle guide, and toggle nut from the truck bed wall completely. 5. Reinstall the tie-down loop through the backing plate into the toggle nut for reuse. If equipped, there are nine holes inside the truck bed for tie-downs. The maximum load is 113 kg (250lb) per tie down. { Caution The truck bed walls will collapse if the tie downs are overloaded.