2014 Chevrolet Silverado 1500 Regular Cab Owner Manual - Page 136

5-4 Instruments and Controls The steering wheel takes about three minutes to start heating. 3 INT (Adjustable Interval Wipes): Turn the band up for more frequent wipes or down for less frequent wipes. Horn To sound the horn, press the center pad on the steering wheel. w (Low Speed): 1 (High Speed): Slow wipes. Fast wipes. If the ignition is put in OFF while the wipers are performing wipes due to windshield washing, the wipers continue to run until they reach the base of the windshield. Windshield Washer Windshield Wiper/Washer Clear ice and snow from the wiper blades before using them. If frozen to the windshield, carefully loosen or thaw them. Damaged wiper blades should be replaced. See Wiper Blade Replacement on page 10-38. Heavy snow or ice can overload the wiper motor. An internal circuit breaker to the motor will stop the motor until it cools down. Wiper Parking If the ignition is put in OFF while the wipers are on w, 1 or 3 INT, they will immediately stop. If the windshield wiper lever is then moved to OFF before the driver door is opened or within 10 minutes, the wipers will restart and move to the base of the windshield. { Warning In freezing weather, do not use the washer until the windshield is warmed. Otherwise the washer fluid can form ice on the windshield, blocking your vision. The windshield wiper control is on the turn signal lever. The windshield wipers are controlled by turning the band with z on it. 8 (Mist): For a single wipe, turn to 8 , then release. For several wipes, hold the band on 8 longer. OFF: Turns the windshield wipers off. L m (Washer Fluid): Push the paddle marked with the windshield washer symbol at the top of the turn signal lever, to spray washer fluid and activate the wipers. The wipers will continue until the paddle is released or the maximum wash time is reached. When the paddle is released, additional wipes may occur depending on how long the windshield washer had been activated. See Washer Fluid on