2014 Chevrolet Silverado 1500 Regular Cab Owner Manual - Page 316

9-62 Driving and Operating SET− (Set/Coast): Press briefly to set the speed and activate cruise control. If cruise control is already active, use to decrease vehicle speed. If equipped with an Allison or Hydra-Matic 6-speed automatic transmission, see "Tow/Haul Mode Grade Braking" under Tow/Haul Mode on page 9-39 for an explanation of how cruise control interacts with the Range Selection Mode, Tow/Haul Mode, and Grade Braking systems. If the cruise control is being used and the Traction Control (TCS) system or StabiliTrak begins to limit wheel spin, the cruise control will automatically disengage. See Traction Control/Electronic Stability Control on page 9-58. When road conditions allow the cruise control to be safely used again, it can be turned back on. * (Cancel): Press to disengage cruise control without erasing the set speed from memory. Setting Cruise Control If the cruise button is on when not in use, it could get pressed and go into cruise when not desired. Keep the cruise control button off when cruise is not being used. The cruise control light on the instrument cluster will come on green after the cruise control has been set to the desired speed. 1. Press 5 to turn the cruise system on. 5 (On/Off): Press to turn the system on or off. The indicator light is white when cruise control is on and turns off when cruise control is off. +RES (Resume/Accelerate): Press briefly to make the vehicle resume to a previously set speed, or press and hold to accelerate. If cruise control is already active, use to increase vehicle speed. 2. Get up to the desired speed. 3. Press and release the SET− button on the steering wheel. 4. Remove foot from the accelerator.