2014 Chevrolet Silverado 1500 Regular Cab Owner Manual - Page 137

Instruments and Controls page 10-28 for information on filling the windshield washer fluid reservoir. See Compass Messages on page 5-35 for the messages that may be displayed for the compass. To set the clock display: 5-5 Compass The vehicle may have a compass display on the Driver Information Center (DIC). The compass receives its heading and other information from the Global Positioning System (GPS) antenna, StabiliTrak®, and vehicle speed information. The compass system is designed to operate for a certain number of miles or degrees of turn before needing a signal from the GPS satellites. When the compass display shows CAL, drive the vehicle for a short distance in an open area where it can receive a GPS signal. The compass system will automatically determine when a GPS signal is restored and provide a heading again. Clock Setting the Time and Date To set the time or date: 1. Select Settings from the Home Page, then select Time and Date Settings. 2. Select the desired function. 3. Turn the MENU knob to increase or decrease the value. 4. Press the MENU knob to go to the next value. After the last value is selected the system will update and return to the Settings menu. Press o BACK to go to the last menu and save the changes. 1. Select Settings from the Home Page, then select Time and Date Settings. 2. Select Clock Display. 3. Turn the MENU knob to Off or On. 4. Press the MENU knob to select. Press o BACK to go to the last menu and save the changes.