2014 Chevrolet Silverado 1500 Regular Cab Owner Manual - Page 294
2014 Chevrolet Silverado 1500 Regular Cab Manual
Page 294 highlights
9-40 Driving and Operating On vehicles with a diesel engine, Tow/Haul Mode Grade Braking can be enabled or disabled by pressing the Tow/Haul Mode button. Use the exhaust brake and Tow/Haul Mode for maximum grade braking. See Towing Equipment on page 9-95. For other forms of grade braking, see Automatic Transmission on page 9-34 and Cruise Control on page 9-61. Also see "Tow/Haul Mode" under Towing Equipment on page 9-95. Manual Transmission Tow/Haul Mode Grade Braking Tow/Haul Mode Grade Braking is only enabled while the Tow/Haul Mode is selected and the vehicle is not in the Range Selection Mode. See "Tow/Haul Mode" listed previously and Manual Mode on page 9-38. Tow/Haul Mode Grade Braking assists in maintaining desired vehicle speeds when driving on downhill grades by using the engine and transmission to slow the vehicle. On vehicles with a gasoline engine, to disable or enable Tow/Haul Grade Braking within the current ignition key cycle, press and hold the Tow/Haul button for five seconds. When the button is released, the requested mode change is made. A DIC message is displayed. See Transmission Messages on page 5-41. If equipped with a manual transmission, this is the shift pattern. To operate the manual transmission: 1 (First): Press the clutch pedal and shift into 1 (First). Then, slowly let up on the clutch pedal as you slowly press down on the accelerator pedal. You can shift into 1 (First) when you are going less than 30 km/h (20 mph). If you have come to a