1994 Honda Civic Owner's Manual - Page 144
1994 Honda Civic Manual
Page 144 highlights
Lights 2. Remove the electrical connector from the bulb by squeezing the connector to unlock the tab on each side. Pull the connector straight back. 3. Remove the rubber weather seal by pulling on the tab. 4. Unclip the end of the hold-down wire from its slot. Pivot it out of the way and remove the bulb. 5. Insert the new bulb into the hole, making sure the tabs are in their slots. Pivot the hold-down wire back in place and clip the end into the slot. 6. Push the rubber weather seal over the bulb. Make sure the tab is on the top. 7. Push the electrical connector onto the tabs of the new bulb. Turn on the headlights to test the new bulb. 8. (Passenger's side) Reinstall the air intake tube. Replacing the Front Side Marker/Turn Signal and Parking Light Bulb SCREW 1. Use a Phillips® head screwdriver to remove the screw from the top of the fender. Maintenance