1994 Honda Civic Owner's Manual - Page 146
1994 Honda Civic Manual
Page 146 highlights
Lights 4. To remove either the tail/stoplight bulb or the turn signal bulb, push it in slightly and turn it counterclockwise. To remove the side marker bulb, pull it straight out of the socket. 5. Install the new bulb in the socket. Insert the socket back in the taillight assembly and turn it clockwise to lock it in place. 6. Test the new bulb. Reinstall the cover over the taillight assembly. Replacing Rear Bulbs (in Trunk Lid) 3. Use a Phillips® head screwdriver to remove the two screws from the bulb holder. Remove the holder from the taillight assembly. 4. Try the taillights and back-up lights to verify which bulb needs replacing. Remove that bulb from the socket by pushing it in slightly and turning it counterclockwise. 5. Install the new bulb in the socket. Test it to make sure it works. 1. Open the trunk. 2. Remove the electrical connector from its hold-down clip by sliding it sideways toward the center of the car. 6. Reinstall the bulb holder assembly. Install the two screws and tighten them securely. Maintenance