2011 Infiniti M Owner's Manual - Page 160

● Audio system To use the memory function, lock the doors with the Intelligent Key that is linked to the settings. To enable the memorized settings: 1. Carry the Intelligent Key that is linked to the settings, and unlock the doors by pushing the driver's door handle request button on the switch or UNLOCK Intelligent Key. 2. Push the ignition switch to the "ON" position. "Connection with the key has been done" will be displayed on the screen and the memorized settings are available (only when a new Intelligent Key is used). ● When the seat, steering column and outside mirrors have already been moved to the memorized position. ● When no position is stored in the memory switch. ● When the engine is started while moving the automatic drive positioner. ● When the selector lever is moved from the P (Park) position to any other position. (However, it will not be canceled if the switch is pushed while the seat and steering column are returning to the previous positions (entry/exit function).) ● When the driver's door remains open for more than 45 seconds and the ignition switch is not in the ON position. ● The seat synchronization function is automatically disabled if the outside mirrors or steering wheel reaches its maximum adjustment. ● The seat synchronization function will not operate if the seat is adjusted over one of the following maximum thresholds: - Seat sliding: 3.0 in (76 mm) - Seatback reclining: 9.1 degrees - Seat lifter (rear side): 0.8 in (20 mm) SYSTEM OPERATION The automatic drive positioner system will not work or will stop operating under the following conditions: ● When the vehicle speed is above 4 MPH (7 km/h). ● When the adjusting switch for the driver's seat and steering column is turned on while the automatic drive positioner is operating. ● When the memory switch 1 or 2 is not pushed for at least 1 second. Pre-driving checks and adjustments 3-29