2011 Infiniti M Owner's Manual - Page 371

NOTE: If you continue to push the warning systems switch from off to on for over 4 seconds, a chime will sound. This will change the default status of the LDW, BSW and FCW systems to OFF so that these systems will not automatically turn on when the engine is started. If this procedure is repeated, the default status will return to ON. For the sensor maintenance, see "INTELLIGENT CRUISE CONTROL (ICC) SYSTEM" earlier in this section. SSD1000 SIC4335 If the IBA OFF indicator light A illuminates with a beep sound, pull off the road to a safe location, stop the vehicle and turn the engine off. Check to see if the sensor window is dirty. If the sensor window is dirty, clean it with a soft cloth and restart the engine. If the sensor window is not dirty, restart the engine. If the IBA OFF indicator light continues to illuminate even if the IBA system is turned on with the IBA OFF switch B , have the system checked by an INFINITI retailer. To turn on the IBA system, see "INTELLIGENT BRAKE ASSIST (IBA) SYSTEM" later in this section. Warning systems switch FCW system operation The FCW system will function at speeds of approximately 10 MPH (15 km/h) and above, when the system turns on. The FCW system is automatically turned on when the engine is started and the warning systems ON indicator 1 illuminates on the switch. You can turn the FCW system off by pushing the warning systems switch on the instrument panel. This switch will turn on and off the LDW, BSW and FCW systems at the same time. See "WARNING SYSTEMS SWITCH" in the "2. Instruments and controls" section for more details. 5-76 Starting and driving