2011 Infiniti M Owner's Manual - Page 194

2. Push the temperature control button (driver side) to set the desired temperature. ● The temperature can be set within the following range. - For U.S.: 60 to 90°F (16 to 32°C) - For Canada: 64 to 90°F (18 to 32°C) ● The temperature of the passenger compartment will be maintained automatically. Air flow distribution and fan speed will also be controlled automatically. 3. To turn off the climate control system, push the "OFF" button. A visible mist may be seen coming from the ventilators in hot, humid conditions as the air is cooled rapidly. This does not indicate a malfunction. Dehumidified defrosting or defogging: 1. Push the front defroster " " button. (The indicator light on the button will come on.) 2. Push the temperature control button to set the desired temperature. ● To quickly remove ice from the outside of the windows, push the fan speed increase " button and set it to the maximum " position. ● As soon as possible after the windshield is clean, push the "AUTO" button to return to the auto mode. " button is ● When the front defroster " pushed, the air conditioner will automatically be turned on at outside temperatures above 23°F ( 5°C) to defog the windshield, and the air recirculate mode will automatically be turned off. Outside air is drawn into the passenger compartment to improve the defogging performance. Air recirculation : " button to Push the air recirculation " change the air circulation mode. When the indicator light illuminates, the flowing air is recirculated inside the vehicle. The air recirculation mode cannot be activated when the air conditioner is in the front defrost". ing mode " Outside air circulation : " button Push the outside air circulation " to change the air circulation mode. When the indicator light illuminates, the flowing air is drawn from outside the vehicle. Automatic air intake control : To set the automatic control mode, perform one of the following operations. ● When the outside air circulation mode is on, push and hold the outside air circulation " button for more than 2 seconds. " ● When the air recirculation mode is on, push and hold the air recirculation " " button for more than 2 seconds. When setting the automatic control mode, both indicator lights will blink twice indicating that the system is in the automatic control mode. Manual operation Fan speed control : Push the fan speed increase " " or " buttons to manually control decrease " the fan speed. Push the "AUTO" button to return to automatic control of the fan speed. Monitor, climate, audio, phone and voice recognition systems 4-33