2011 Infiniti M Owner's Manual - Page 375
2011 Infiniti M Manual
Page 375 highlights
BREAK-IN SCHEDULE The IBA system will remain in the last ON or OFF state it was left in until it is manually changed by pressing the IBA OFF switch. Illumination of the IBA OFF indicator light without the warning chime sound is an indication that the IBA system is temporarily unavailable. It will occur under the following conditions: - When driving into a strong light (for example, sunlight) The IBA OFF indicator light will turn off when the system returns to its normal operating conditions. For the sensor maintenance, see "INTELLIGENT CRUISE CONTROL (ICC) SYSTEM" earlier in this section. CAUTION During the first 1,200 miles (2,000 km), follow these recommendations to obtain maximum engine performance and ensure the future reliability and economy of your new vehicle. Failure to follow these recommendations may result in shortened engine life and reduced engine performance. ● Avoid driving for long periods at constant speed, either fast or slow. Do not run the engine over 4,000 rpm. ● Do not accelerate at full throttle in any gear. ● Avoid quick starts. ● Avoid hard braking as much as possible. SSD1000 IBA system operation The IBA system will function when your vehicle is driven at speeds of approximately 10 MPH (15 km/h) or above, and when the vehicle's speed is approximately 10 MPH (15 km/h) faster than that of the vehicle ahead. To turn the system off/on, push and hold the IBA OFF switch B for more than 1 second after starting the engine. When the IBA OFF indicator light A on the instrument panel turns off and the IBA OFF switch is pushed, the system will turn off and the IBA OFF indicator light will illuminate. When the IBA OFF switch is pushed again, the system will turn on and the IBA OFF indicator light will turn off. 5-80 Starting and driving