2011 Infiniti M Owner's Manual - Page 321

3. Highlight

the

“Lane

Departure

Preven-

tion”

key,

select

ON

(enabled)

or

OFF

(disabled) and push the ENTER

°

2

button.

The factory default setting is set to ON

(enabled).

If you set all of the systems to disable and push

the dynamic driver assistance switch, the indi-

cator

of

the

disabled

system

will

blink

for

approximately 4 seconds and turn off.

See

“BLIND

SPOT

WARNING

(BSW)

SYSTEM/BLIND

SPOT

INTERVENTION™

(BSI)

SYSTEM” later in this section and “DISTANCE

CONTROL ASSIST (DCA) SYSTEM” later in this

section.

Automatic deactivation

Condition A :

The warning and assist functions of the LDP

system are not designed to work under the

following conditions:

●

When you operate the lane change signal

and change the traveling lanes in the direc-

tion of the signal. (The LDP system will be

deactivated for approximately 2 seconds af-

ter the lane change signal is turned off.)

●

When the vehicle speed lowers to less than

approximately 45 MPH (70 km/h).

●

When the BSI system activates an audible

warning or brake control.

After the above conditions have finished and

the necessary operating conditions are satis-

fied, the warning and assist functions will re-

sume.

Condition B :

The assist function of the LDP system is not

designed to work under the following condi-

tions (warning is still functional):

●

When the brake pedal is depressed.

●

When the steering wheel is turned as far as

necessary for the vehicle to change lanes.

●

When the accelerator pedal is depressed

while the brake control assist is provided.

●

When

the

Intelligent

Cruise

Control

(ICC)

approach warning occurs.

●

When the hazard warning flashers are oper-

ated.

●

When driving on a curve at high speed.

After the above conditions have finished and

the necessary operating conditions are satis-

fied, the LDP brake control assist function will

resume.

Condition C :

Under

the

following

conditions,

a

beep

will

sound and the LDP system will be canceled

automatically. The LDP ON indicator light will

blink in green, and the LDP system cannot be

activated:

●

When the VDC system (except TCS function)

or ABS operates.

●

When the VDC system is turned off.

●

When the drive mode select switch is turned

to the SNOW mode.

SSD1002

5-26

Starting and driving

Section	Page
2011 M37/M56 Owner's Manual	1
OM1E 0Y51U2	1

2011 Infiniti M Owner's Manual - Page 321

2011 Infiniti M Manual

Page 321 highlights