2011 Infiniti M Owner's Manual - Page 469

INSTALLING FRONT LICENSE PLATE Use the following steps to mount the license plate: Before mounting the license plate, confirm that the following parts are enclosed in the plastic bag. Only use the recommended mounting position, otherwise the Intelligent Cruise Control (ICC) sensor obstruction (if so equipped) may result. ● License plate bracket ● J-nut × 2 ● Screw × 2 ● Screw grommet × 2 1. Park the vehicle on flat, level ground. 2. Locate the center position A as illustrated. Line up the license plate bracket under the top of the front bumper B with the tabs C . Hold the license plate bracket in place. 3. Mark the center of the hole D with a felt-tip pen. 4. Carefully drill two pilot holes using a 0.39 in (10 mm) drill bit at the marked locations. (Be sure that the drill only goes through the bumper fascia.) 5. Insert grommets into the hole on the fascia. STI0722 9-14 Technical and consumer information