2011 Infiniti M Owner's Manual - Page 351
2011 Infiniti M Manual
Page 351 highlights
position in the lane) or traffic or vehicle condition (for example, if a vehicle is being driven with some damage). ● When distance measurement becomes impaired due to adhesion of dirt or obstruction to the sensor ● When a wheel slips Automatic cancellation A chime sounds under the following conditions and the control is automatically canceled. ● When the vehicle ahead is not detected and your vehicle is traveling below the speed of 15 MPH (24 km/h) SSD0284A ● When the system judges the vehicle is at standstill ● When the selector lever is not in the D or Manual mode ● When the windshield wipers are operating at high speed (HI). If the vehicle is equipped with a rain sensing auto-wiper, the system may cancel when the wipers are set to the AUTO position. ● When the parking brake is applied ● When the drive mode select switch is turned to the SNOW mode ● When the VDC system is turned off ● When ABS or VDC (including the traction control system) operates ● When driving into a strong light (i.e., sunlight) NOTE: The approach warning chime may sound and the system display may blink when the ICC sensor detects some reflectors A which are fitted on vehicles in other lanes or on the side of the road. This may cause the ICC system to decelerate or accelerate the vehicle. The ICC sensor may detect these reflectors when the vehicle is driven on winding roads, hilly roads or when entering or exiting a curve. The ICC sensor may also detect reflectors on narrow roads or in road construction zones. In these cases you will have to manually control the proper distance ahead of your vehicle. Also, the sensor sensitivity can be affected by vehicle operation (steering maneuver or driving 5-56 Starting and driving
![](/manual_guide/autos/2011-infiniti-m-owners-manual-51306aa/351.png)