2009 Kawasaki Vulcan 2000 Classic LT Owners Manual - Page 112
2009 Kawasaki Vulcan 2000 Classic LT Manual
Page 112 highlights
110 MAINTENANCE AND ADJUSTMENT lightly turning the throttle grip back and forth. out the decelerator cable adjust• Turn ing nut until there is no play when the throttle grip is completely closed. Tighten the locknut. A. Throttle Grip B. 2 a 3 mm (0.08 a 0.12 in.) • If there is improper play, adjust it. the locknuts at the upper • Loosen ends of the throttle cables, and screw both throttle cable adjusting nuts in completely so as to give the throttle grip plenty of play. Adjustment A. B. C. D. Accelerator Cable Decelerator Cable Adjusting Nuts Locknuts the accelerator cable adjusting • Turn nut until 2 a 3 mm (0.08 a 0.12 in.) of throttle grip play is obtained. Tighten the locknut.
![](/manual_guide/autos/2009-kawasaki-vulcan-2000-classic-lt-owners-manual-2eadc42/112.png)
110
MAINTENANCE AND ADJUSTMENT
lightly turning the throttle grip back
and forth.
A. Throttle Grip
B. 2
a
3 mm (0.08
a
0.12 in.)
•
If there is improper play, adjust it.
Adjustment
•
Loosen the locknuts at the upper
ends of the throttle cables, and screw
both throttle cable adjusting nuts in
completely so as to give the throttle
grip plenty of play.
•
Turn out the decelerator cable adjust-
ing nut until there is no play when
the throttle grip is completely closed.
Tighten the locknut.
A. Accelerator Cable
B. Decelerator Cable
C. Adjusting Nuts
D. Locknuts
•
Turn the accelerator cable adjusting
nut until 2
a
3 mm (0.08
a
0.12 in.) of
throttle grip play is obtained. Tighten
the locknut.