2009 Kawasaki Vulcan 2000 Classic LT Owners Manual - Page 43
2009 Kawasaki Vulcan 2000 Classic LT Manual
Page 43 highlights
GENERAL INFORMATION 41 Right Side Cover Installation Insert the ignition key into the lock, and turn the ignition key clockwise. Align the top edge of the right side cover so that it is parallel to the frame tube that is directly above the right aside cover. Engage the two front projection into the two grommets in the right side cover and slide the cover rearward. Keep the ignition key turned fully clockwise and push in the rear section of right side cover to engage the projection and grommet. Turn the ignition key counterclockwise to lock the right side cover in place and remove the ignition key. Left Side Cover Removal Remove the right side cover, rider's and passenger's seat. Remove the screw. Pull the left side cover outward. • • • A. Screw B. Left Side Cover żPull the front of the right side cover and make sure that the front of the right side cover is not out of place. NOTE żSide cover installation is performed in the reverse order of removal. NOTE