2009 Kawasaki Vulcan 2000 Classic LT Owners Manual - Page 116
2009 Kawasaki Vulcan 2000 Classic LT Manual
Page 116 highlights
114 MAINTENANCE AND ADJUSTMENT Adjustment Turn the adjuster so that the clutch lever will have 2 a 3 mm (0.08 a 0.12 in.) of play. • it cannot be done, use the nuts at • If the lower end of the clutch cable. WARNING Too much cable play can prevent clutch disengagement and cause an accident resulting in serious injury or death. When adjusting the clutch or replacing the cable, be sure the upper end of the clutch outer cable is fully seated in its fitting, or it could slip into place later, creating enough cable play to prevent clutch disengagement. A. Nuts B. Clutch Cable żAfter the adjustment is made, start the engine and check that the clutch does not slip and that it releases properly. żFor minor corrections, use the adjuster at the clutch lever. NOTE