2006 Mazda MAZDA6 Owner's Manual - Page 103

Mazda6_8U66-EA-05F_Edition2 Page103 Tuesday, July 26 2005 11:23 AM Black plate (103,1) Knowing Your Mazda Doors and Locks NOTE If the battery had been disconnected during vehicle maintenance or for other reasons, the power windows will not fully open and close automatically. Reinitialization of the automatic function on the front passenger's power window cannot be performed using the master control switches. Carry out the following procedure on each door switch to resume operation: 1. Turn the ignition switch to the ON position. 2. Press the switch and fully open the power window. 3. Pull up the switch to fully close the power window and continue holding the switch for about 2 seconds after the window fully closed. After the system has been re-initialized, the front passenger's power window can be fully opened or closed automatically using the master control switches. Two-step down function With the power window completely closed, press the switch lightly and it will open and stop about 3 cm (1 in) from the top. If you continue to press and hold the switch, the window will resume opening all the way. NOTE Canceling the two-step down function To cancel the two-step down function for the front power windows, carry out the following procedure using the master control switches. 1. Turn the ignition switch to the ON position and complete the following procedure within 5 seconds: Press the power window switch 2 times firmly, then pull it 2 times firmly. Master control switches Left front window Right front window 2. Turn the ignition switch to the LOCK position. 3. With the ignition switch in the LOCK position, and within 40 seconds, turn the ignition switch to the ON position and complete the following procedure within 5 seconds: Press the power window switch 2 times firmly, then pull 2 times firmly. Pressing the power window switch once when the window is fully closed will only open it about 3 cm (1 in) to allow convenient ventilation of the cabin. 3-25 Form No.8U66-EA-05F