2006 Mazda MAZDA6 Owner's Manual - Page 311

Mazda6_8U66-EA-05F_Edition2 Page311 Tuesday, July 26 2005 11:27 AM Black plate (311,1) Maintenance and Care Owner Maintenance 5. Disconnect the socket and bulb assembly from the electrical connector by pressing the tab on the connector with your finger and pulling it. 2. Remove the bulb by pushing it in slightly and turning it counterclockwise. NOTE l 3. Install the new bulb in the reverse order of removal. Side-marker lights 1. If you are changing the left side-maker light, start the engine, turn the steering wheel all the way to the right, and turn off the engine. If you are changing the right side-maker light, turn the steering wheel to the left. 2. Turn the screws counterclockwise and remove them. If the halogen bulb is accidentally touched, it should be cleaned with rubbing alcohol before being used. To replace the bulb, contact an Authorized Mazda Dealer. Use the protective cover and carton for the replacement bulb to dispose of the old bulb promptly and out of the reach of children. l l 6. Install the new socket and bulb assembly in the reverse order of removal. Front turn signal lights 1. Turn the socket and bulb assembly counterclockwise and remove it. 8-45 Form No.8U66-EA-05F