2008 Mercedes CL-Class Owner's Manual - Page 195

Control systems COMAND navigation (introduction) Setting POI symbols You can set which points of interest (POIs) should be displayed as symbols in the map. POIs are garages, hotels, movie theaters or restaurants, for example. Select "Standard symbols", "Personal symbols" or "No symbols". If you select "Personal symbols", the list of POIs appears. Switching POI symbol display on or off: Select the desired POI. The corresponding symbol displays are switched on or off, depending on the previous status. A checkmark indicates which status is active. You can switch on the symbol displays for more than one POI. Arrival time and distance You can set whether the estimated arrival time and the distance to the destination should be displayed in the map. Displaying: Select "Navi" "Map Display". "Navi" i Depending on the map scale on the map, POI symbols may not be visible on the map although their display is activated. In addition, POI symbols may be covered by the map's labels. The map display list appears. A dot R indicates the current setting. Select "Arrival Time/Distance". Depending on the previous status the display showing the arrival time and distance is switched on or off. The following settings are possible: "Standard symbols" (symbol determined by the factory settings) "Personal symbols" (you can determine the symbols yourself) "No symbols" Adjusting: Select "Navi" "Map Display". "Navi" i The list shows all symbols that are contained in the digital map across all states (USA) and/or provinces (CDN). Not all POIs in all states (USA) or in all provinces (CDN) are available, however. Certain POI symbols may not be displayed on the map, even if the symbol display is switched on. The map display list appears. A dot R indicates the current setting. Exiting menu: Slide omp or press back button L in the center console ( page 84). 194